-
Mr davoodmaneshThe customers are quite satisfied with our products
-
Mr subhashThanks so much for your kindly help
-
Mr JosephCustomer get the goods
5730SMD led module/DC12V/1.2w injection led module/big view angle injection led module
Color | Red/yellow/blue/green/white Could Be Avaible | Voltage | Constant Voltage |
---|---|---|---|
Material | ABS | View Angle | 160degree |
Size | 65*15*05mm | Luminous | 75-90LM |
IP Grade | IP67 | Package | 20pcs Per String |
Package | With Antistatic Bag And Carton | Warranty | 3years |
Current | Also Constant Current Could Be Avaible |
5730SMD led module/DC12V/1.2w injection led module/big view angle injection led module
Features:
1. Has wide viewing angle
2. High intensity of each module, suitable for big & medium-sized LOGO & signage
3. Quick heat diffusion could prolong chips' lifespan
4. each strip is not more than 30 pieces if series connection is adopted
5. with hole on both ends, can be fixed by screw
6. Input: DC12V
7. IP rate: IP65
8. lifespan: 50,000hrs
9.Excellent Design:Graceful appearance. All Electronic components fully covered by high transparency PC are protected against terrible outdoor environments
Technical parameter :
ITem No. | BH6515-001 |
Name | 5730 3led injection module |
LED type | 5730SMD |
Color | red,yellow,blue,green,cool white,pure white,warm white |
Beam angle | 160 degree |
LED QTY | 3PCS |
Life-span | 50000hrs |
Working Voltage | DC12V |
Power | 1.2W |
Driving method | constant voltage |
Shell materials | ABS |
Shell size | 68*18*5mm |
Shell color | White color |
IP Grade | IP67 |
Instructions:
♦ This product applies in 5 ~ 10 cm thickness, small-size and medium LOGO Plastic Light Box.
♦ SMD LED light with large and uniform emitting angle, no shadow, low thermal resistance, low brightness degradation
♦ This module could be linked up to 20-30 pcs modules, more than 30pcs is strictly prohibited.
♦ The diameter of the power cord should be based on the actual maximum current ,the product power, cable length (recommended no more than 6 meters), and the voltage of transmission line .
♦ Please connect wires following positive and negative markings on the circuit board.