rgb pixel control lighting smd 5050 strip lights 300 leds 5m

rgb pixel control lighting smd 5050 strip lights 300 leds 5m

Specifications:

60LED/M DC12V Power: 7.2Watt/M 10mm Width Yellow/White FPC/Black FPC 5Meters/Roll

4) Preservation Type

A) Non-waterproof

B) Waterproof IP65 (Epoxy encapsulated)

C) Waterproof IP66 (Silicon tube)

D) Waterproof IP67 (Semi tube+epoxy coated)

E) Waterproof IP68 (Silicon tube with epoxy inside)

5) By adopting high quality FPC, ultra-thin thickness of 0.3mm, it shows good performance under high

temperature. Preservation Grade up to IP68. And it's easy to cut, joint and install, with 3M double-side

adhesive tape. Long lifespan: 50000Hours.

1. LED chip——SMD5050 R, G, B, W(WW/CW) 4 in 1 LED chip.

2. Standard Reel Length: 5meter/roll, also can be customized.

3. Cutted: you can cut this stuff pretty easily with wire cutters, Solder to the 0.1'' copper pads and you're

good to go.

DC12V: cutted per 3LED, there are cut-lines every 5cm.DC24V: cutted per 6LED, there are cut-lines

every 10cm.

4. Power: the theory power is 19.2W/M, but the really power just about 12W/M.

5. Power supply:

DC12V led strip: you must use a 12V DC power supply to power this strip, do not use higher than 13V,

DC24V led strip: please use 24V DC power supply, or you can destroy the entire strip.

6. Sticky: non-waterproof: with 3M adhesive on back side for sticky;

waterproof: screw+silicon clip, or 3M adhesive back side.

8. Type: RGBW, RGBCW, RGBWW——60LEDs/m, White PCB

Waterproof——DC12V; Waterproof——DC24V

FAQ

Q1: What are your market reach throughout the region?

A1: Our markets around the world in every corner, we have eight years of experience in foreign trade.

We have worked with every country buyers, producers and distributors to reach more than 19,000.

Q2: Can I get your samples first?

A2: Yes. Samples order is welcome.

However we will charge samples cost, which will be return in your mass order.

Q3: Do you have the ability to do independent research and development?

A3: Our engineering department has over 20 people, we have research and development capabilities.

We also collect regularly customers feedback, to improve products and make new product launches.

Q4: What is the lead time for production?

A4: 3-5 days for samples, 12-15 days for mass order.

Q5: How you control your product quality?

A5: 100% of the PRODUCTS will be tested and keep lighting to test its quality reliability,

each products should pass all our QC procedures before shipping to customers.

Q6: What type customer is your client?

A6: Hotel projects, wholesaler, export company, supermarket, retail chains On-line shop,

also personal home use.